vlogo.gif (1762 bytes)

Ventacon Limited


a11.jpg (8394 bytes)

SAMPLE SYSTEM ADAPTORS FOR NICOLET F-T RAMAN
SPECTROMETERS
- SERIES A

A-11 Adaptor

NICOLET SAMPLE HOLDING
ADAPTOR

The Nicolet sample mounting system is unique and is based on a stage drilled with three 1/8" diameter vertical holes. Several Ventacon cells can be accommodated directly into this system eg. the Model SR-1 Sample Rotator and the Model C-1 Cryogenic Cell.

Some customers have Nicolet equipment and also instruments from other manufacturers such as Perkin Elmer or Bio-Rad. The Series A Nicolet adaptor enables users to fit the range of cells that Ventacon supply on the 3"x2" 'infrared card' system to their Nicolet instruments. Thus the Ventacon cells become applicable to a range of spectrometers. If customers have Bruker equipment and wish to use our cells in their Bruker and other instruments would they please contact us for advice.

Where sample heating is a problem, the use of KBr pellets or nujol mulls pressed between potassium chloride/bromide windows is recommended. You can examine the same sample in the mid-infrared and the Raman if you have the Ventacon adaptor. [For details see Y.D. West Int.J.Vib.Spect.,[www.ijvs.com] 1, 1, 5 (1996) and P.J. Hendra, Int. J. Vib. Spect., [www.ijvs.com] 4, 3, 2 (2000) ].

LIGHT TRAPS FOR NICOLET F-T RAMAN SPECTROMETERS

ALL VENTACON ACCESSORIES OPERATE WITH THE SAMPLE CHAMBER CLOSED AND WITH NICOLET'S INTERLOCKS OPERATIVE.

Nicolet do not provide, as standard, facilities to take cables or tubes from inside the Raman sample chamber to the laboratory outside but they do provide in some of their products a 2"aperture plugged with a metal obstruction.

[Next]